a

Home

1-888-571-3036

Materials
All HDPE non-pressure rated conduit meet the ASTM F2160 standard. All resin used in HDPE non-pressure duct will meet the cell classes as required within PE-3408 material per ASTM D3350.

Scope
All JM HDPE non-pressure rated conduit meets ASTM F 2160 that has been heavily promoted by PPI within Industry Standardization.

Duct
This conduit can be used in applications such as Communication, CATV, or power wire and cables as innerduct or outerduct.

Installation Design
: HDPE pipe is easy to install both overground and underground with the newer technology available. Mechanical Connections can be added to HDPE pipe. Directional Drilling is commonly used when installing HDPE duct underground.

Standard Packaging Lengths
Smaller diameters <6 inch are continuously reeled and packaged as shown below and it can also be packaged per request. 8 and 6 inches pipe are manufactured in 40 foot stick-type lengths.

Pipe Dimensions

Non-Pressure Rated

O.D

DR

Nominal I.D. Inches

Minimum Wall Inches

Weight

Standard Ft. Per One Way Reel

Reel Size ( H x W x D)

Nominal Inches

Actual Inches

Lb.Per Foor (Approx.)

1"

1.315

11

1.063

0.120

0.19

10,000

102" x 48" x 32"

13.5

1.111

0.097

0.16

10,000

102" x 48" x 32"

1.25"

1.660

11

1.343

0.151

0.31

7,500

102" x 48" x 32"

13.5

1.402

0.123

0.26

7,500

102" x 48" x 32"

Special Wrap

6,000

96" x 48" x 32"

1.5"

1.900

11

1.009

0.173

0.40

6,000

96" x 48" x 36"

13.5

0.822

0.141

0.33

6,000

96" x 48" x 36"

Special Wrap

5,000

102" x 48" x 36"

2"

2.375

11

1.921

0.216

0.63

3,000

96" x 48" x 36"

13.5

2.005

0.176

0.52

3,000

96" x 48" x 36"

**2.5"

2.875

13.5

2.428

0.213

0.77

2,000

102" x 48" x 36"

3"

3.500

11

2.832

0.318

1.37

1,000

102" x 48" x 45"

13.5

2.956

0.259

1.14

1,000

102" x 48" x 45"

4"

4.500

11

3.641

0.409

2.26

725

102" x 48" x 68"

13.5

3.801

0.333

1.88

725

102" x 48" x 68"

Special Wrap

600

96" x 48" x 68"

550

96" x 48" x 68"

6"

6.625

11

5.361

0.602

4.90

Offer in Bundle

13.5

5.594

0.491

4.07

450

102" x 48" x 68"

Contact J-M's Polyethylene department
for information on the following:
§ Special Diameters
§ Nonstandard SDR's
§ Custom Colors and / or Markings
§ Special Ropes or Tapes
§ Freight Charges
§ Special Parallel Reel Requirements
§ Custom Reel Lengths
§ PVC Telecom SCH 40 & TYPE C DUCT long bell are available upon request

Materials
HDPE pressure pipe can be made to follow the specifications as outlined below.
All classes and types of pressure pipe are manufactured using a virgin PE 3408 resin as specified in ASTM D3350 with UV protection.

Type

Class*

Specification

IPS
SDR 11 / 160 psi

SDR 13.5 / 125 psi

SDR 17 / 100 psi

SDR 21/ 80 psi ASTM D3035 or ASTM F714

DIPS
SDR 11 / 160 psi

SDR 13.5 / 125 psi

SDR 17 / 100 psi

SDR 21/ 80 psi ASTM F714

IPS
SIDR 11.5 / 125 psi

SIDR 15 / 100 psi ASTM D2239

*Other classes can be made upon request.

Scope
The specification with which J-M Manufacturing's HDPE pressure pipe is manufactured designates general requirements for their various standards they follow. The pipe can be used for all types of water applications: Potable Water, Sewer, Drain, and Reclaimed Water.

Pipe
J-M HDPE pressure pipe is suitable for use as pressure conduit.

Installation Design
: HDPE pipe is easy to install underground with the newer technology available. The pipe can be joined by various different heat fusions such as Electrofusion, Socket Fusion, Butt Fusion, etc. Mechanical Connections can also be added to HDPE pipe. HDPE pipe can also be utilized in other advanced applications such as Pipeline Rehabilitation, Sliplining and Horizontal and Directional Drilling.

Standard Laying Lengths
All smaller pipes (<6 inch) can be extruded at the continuous reel lengths by request. Larger and Smaller diameters are manufactured in sectioned stick-type 40 or 50 foot lengths.

Applicable Specifications
All Potable Water HDPE products are listed with NSF and meet the criteria in both NSF 14 and 61 specifications. Potable Water Products are commonly manufactured with blue stripes.

Reclaimed/Sewer Applications: .
All HDPE products can be made with a purple stripe on the outside for reclaimed water and a green stripe for sewer applications. These products will not bear the NSF marking but are manufactured to their respectable ASTM standards.

HDPE DIPS (DUCT IRON PIPE SIZE) Pressure PIPE Dimension

DIPS Size (inches)

Nominal OD (inches)

SDR

Minimium Wall (in)

Average ID (in)

Weight (lbs/ft)

Ft. Per T/L

4

4.80

11 (160 Psi)

0.436

3.876

2.61

16,720

13.5 (125 Psi)

0.356

4.045

2.17

16,720

17 (125 Psi)

0.282

4.202

1.75

16,720

6

6.90

11 (160 Psi)

0.627

5.571

5.39

7,840

13.5 (125 Psi)

0.511

5.817

4.48

7,840

17 (125 Psi)

0.406

6.039

3.62

7,840

8

9.05

11 (160 Psi)

0.823

7.305

9.28

4,400

13.5 (125 Psi)

0.670

7.630

7.70

4,400

17 (125 Psi)

0.532

7.922

6.22

4,400

** 10"-24" Soon coming in September 2002!

10

11.10

11 (160 Psi)

1.009

8.961

13.95

2,880

13.5 (125 Psi)

0.822

9.357

11.59

2,880

17 (125 Psi)

0.653

9.716

9.37

2,880

12

13.20

11 (160 Psi)

1.200

10.656

19.73

2,240

13.5 (125 Psi)

0.978

11.127

16.40

2,240

17 (125 Psi)

0.776

11.555

13.24

2,240

14

15.30

11 (160 Psi)

1.391

12.351

26.51

1,680

13.5 (125 Psi)

1.133

12.898

22.02

1,680

17 (125 Psi)

0.900

13.392

17.80

1,680

16

17.40

11 (160 Psi)

1.582

14.046

34.29

1,440

13.5 (125 Psi)

1.289

14.667

28.49

1,440

17 (125 Psi)

1.024

15.229

23.03

1,440

18

19.50

11 (160 Psi)

1.773

15.741

43.07

1,000

13.5 (125 Psi)

1.444

16.439

35.77

1,000

17 (125 Psi)

1.147

17.068

28.91

1,000

20

21.60

11 (160 Psi)

1.964

17.436

52.85

800

13.5 (125 Psi)

1.600

18.208

43.91

800

17 (125 Psi)

1.271

18.905

35.49

800

24

25.80

11 (160 Psi)

2.345

20.829

75.38

640

13.5 (125 Psi)

1.911

21.749

62.64

640

17 (125 Psi)

1.518

22.582

50.63

640

* ASTM F-714 with NSF Approval.
* 40 Feet Length in stick type.
* Available in Blue, Green, Purple Color Stripes.
* For Water Pressure Application: Potable, Sewer, and Reclaimed Water.

HDPE IPS (IRON PIPE SIZE) Pressure PIPE Dimension

DIPS Size (inches)

Nominal OD (inches)

SDR

Minimium Wall (in)

Average ID (in)

Weight (lbs/ft)

Ft. Per T/L

4

4.500

11 (160 Psi)

0.409

3.633

2.29

16,720

13.5 (125 Psi)

0.333

3.734

1.90

16,720

17 (125 Psi)

0.265

3.938

1.54

16,720

6

6.625

11 (160 Psi)

0.602

5.349

4.97

7,840

13.5 (125 Psi)

0.491

5.584

4.13

7,840

17 (125 Psi)

0.390

5.798

3.34

7,840

8

8.625

11 (160 Psi)

0.784

6.963

8.42

4,400

13.5 (125 Psi)

0.639

7.270

7.00

4,400

17 (125 Psi)

0.507

7.550

5.65

4,400

** 10"-24" Soon coming in September 2002!

10

10.750

11 (160 Psi)

0.977

8.679

13.09

2,880

13.5 (125 Psi)

0.796

9.062

10.87

2,880

17 (125 Psi)

0.632

9.410

8.78

2,880

12

12.750

11 (160 Psi)

1.159

10.293

18.41

2,240

13.5 (125 Psi)

0.944

10.749

15.29

2,240

17 (125 Psi)

0.750

11.160

12.36

2,240

14

14.000

11 (160 Psi)

1.273

11.301

22.20

1,680

13.5 (125 Psi)

1.037

11.802

18.44

1,680

17 (125 Psi)

0.824

12.253

14.91

1,680

16

16.000

11 (160 Psi)

1.455

12.915

29.00

1,440

13.5 (125 Psi)

1.185

13.488

24.09

1,440

17 (125 Psi)

0.941

14.005

19.46

1,440

18

18.000

11 (160 Psi)

1.636

14.532

36.69

1,000

13.5 (125 Psi)

1.333

15.174

30.48

1,000

17 (125 Psi)

1.059

15.755

24.64

1,000

20

20.000

11 (160 Psi)

1.818

16.146

45.30

800

13.5 (125 Psi)

1.481

16.860

37.63

800

17 (125 Psi)

1.176

17.507

30.41

800

24

24.000

11 (160 Psi)

2.182

19.374

65.24

640

13.5 (125 Psi)

1.778

20.231

54.21

640

17 (125 Psi)

1.412

21.007

43.81

640

* ASTM F-714, ASTM D-3035 with NSF Approval.
* 40 Feet Length in stick type.
* Available in Blue, Green, Purple Color Stripes.
* For Water Pressure Application: Potable, Sewer, and Reclaimed Water.

PVC

J-M Schedule 40/80 Heavy Wall PVC Electrical Conduit

J-M's Schedule 40/80 PVC rigid nonmetallic conduit is designed and produced for use in both above ground and underground installation that offer the following:

Highest Quality Control Standards.

U.L. Listed
Rated use with 90°C Conduits
Heat and Fire Resistance
Impact Resistance
Corrosion Resistance
Easy Installation and Tight Joint
Ultraviolet Resistance

J-M PVC Schedule 40 and Schedule 80 conduit are manufactured in accordance with the following specifications:

Underwriters Laboratories ( UL )

UL-651

National Electrical Manufacturers Association ( NEMA )

NEMA TC-2

Federal Specification

WC-1094-A

J-M PVC conduits are manufactured in accordance with the following specifications:

Power Ducts:

NEMA TC-6 and TC-8
ASTM F-512
F.P.L. / R.E.A. / LADWP / SDG&E / PSE&G
Sierra Pacific Power / Puget Sound Power

Telephone Ducts:

GTS-8342
PTS-66 & PTS-77
AT&T 8546

J-M PVC SCHEDULE 40 / 80 CONDUIT
Rigid Non-metallic Conduit for use in Both above-ground and Underground Installations
UL Listed and Rated for 90°C Conductor

Pipe Size( In.)	Avg. OD	Schedule 40		Schedule 80
Pipe Size( In.)	Avg. OD	Min.T	Lbs/Ft.	Min.T	Lbs/Ft.
1/2	0.840	0.109	0.18	0.147	0.22
3/4	1.050	0.113	0.24	0.154	0.30
1	1.315	0.133	0.33	0.179	0.42
1-1/4	1.660	0.140	0.45	0.191	0.60
1-1/2	1.900	0.145	0.56	0.200	0.72
2	2.375	0.154	0.74	0.218	0.98
2-1/2	2.875	0.203	1.26	0.276	1.51
3	3.500	0.216	1.63	0.300	2.13
3-1/2	4.000	0.226	1.97	---	---
4	4.500	0.237	2.34	0.337	3.10
5	5.563	0.258	3.19	0.375	4.30
6	6.625	0.280	4.11	0.432	5.9
• Standard Color : Gray ; Standard Overall Length: 10' ± 3/4" (20' ± 1" available upon request ) ; Belled end Only ; Cell Classification : 12233C per ASTM D1784. • All dimensions are in inches unless specified otherwise. • ( T ) = Wall Thickness, ( Lbs / Ft. ) = Approximate Weight. • Specification Conformance : ( Underwriters Laboratories ) UL 651: " Standard for Schedule 40 and 80 Rigid PVC Conduit " ( National Electrical Manufacturers Association ) NEMA TC-2 : " ELectrical PVC Tubing ( EPT ) and Conduit ( EPC-40 and EPC-80 ) " Federal Specification WC-1094-A

top

J-M PVC POWER & COMMUNICATION DUCTS
Type EB-For Concrete Encasement - Rated for 90°C Cable

Nominal Pipe Size	Outside Diameter ( OD )	Type EB 20*		Type EB 35*
Nominal Pipe Size	Outside Diameter ( OD )	Min.T	Lbs/Ft.	Min.T	Lbs/Ft.
2	2.375	0.060	0.33	---	---
3	3.500	0.061	0.56	0.076	0.68
4	4.500	0.082	0.91	0.100	1.08
5	5.563	0.103	1.41	0.126	1.67
6	6.625	0.125	1.98	0.152	2.36
* Represents min. Pipe Stiffness value based on 500,000 psi Modulus per ASTM F512. • Standard Color : Gray ; Standard Overall Length: 20' ± 1" ; Belled end Only • All dimensions are in inches unless specified otherwise. • ( T ) = Wall Thickness, ( Lbs / Ft. ) = Approximate Weight. • Specification Conformance : EB 20 is UL Listed under UL 651A and complies with NEMA TC-6 : " PVC and ABS Plastic Utilities Duct for Underground Installation ". EB35 complies with NEMA TC-8 : " Extra-Strength PVC Plastic Utilities Duct for Underground Installation ". EB 20 and EB 35 complies with ASTM F512 : " Specification for Smooth Wall PVC Conduit and Fittings for Underground Installation ".

top

J-M PVC POWER & COMMUNICATION DUCTS
Type DB-For Direct Burial - Rated for 90°C Cable

Nominal Pipe Size	Outside Diameter ( OD )	Type EB60*		Type DB 100*		Type DB 120*
Nominal Pipe Size	Outside Diameter ( OD )	Min.T	Lbs/Ft.	Min.T	Lbs/Ft.	Min.T	Lbs/Ft.
1	1.315	---	---	---	---	0.060	0.20
1-1/2	1.900	---	---	---	---	0.060	0.29
2	2.375	0.060	0.36	---	---	0.077	0.44
3	3.500	0.092	0.79	---	---	0.118	0.97
3-1/2	4.000	---	---	0.128	1.20	---	---
4	4.500	0.121	1.26	0.145	1.45	0.154	1.57
5	5.563	0.152	1.95	0.179	2.14	0.191	2.43
6	6.625	0.182	2.75	0.213	3.03	0.227	3.42
* Represents min. Pipe Stiffness value based on 500,000 psi Modulus per ASTM F512. • Standard Color : Gray ; Standard Overall Length: 20' ± 1" ; Belled end Only • All dimensions are in inches unless specified otherwise. • ( T ) = Wall Thickness, ( Lbs / Ft. ) = Approximate Weight. • Specification Conformance : DB 60 complies with NEMA TC-6 : " PVC and ABS Plastic Utilities Duct for Underground Installation ". DB 120 complies with NEMA TC-8 : " Extra-Strength PVC Plastic Utilities Duct for Underground Installation ". All DB P&C Duct complies with ASTM F512 : " Specification for Smooth Wall PVC Conduit and Fittings for Underground Installation ".

top

J-M PVC TELEPHONE DUCTS
Type C - For Direct Burial - Rated for 90°C Cable

Nominal Pipe Size	Outside Diameter ( OD )	Min. Wall Thickness ( T )*	Approx. Lbs/Ft.
4	4.350	0.145	1.51
• Standard Color : Gray ; Standard Laying Length: 20' ± 1" ; Belled end Only • All dimensions are in inches unless specified otherwise. • * Based on 500,000 psi Modulus • Specification Conformance : NEMA TC-10 : " PVC and ABS Plastic Communications Duct and Fittings for Underground Installation ". ( Pacific Telephone Specification ) PTS -77

FOR INFORMATION CALL

FLORIDA DIRECTIONAL BORING EQUIPMENT & SUPPLIES INC.

1-888-571-3036

Home

O.D		DR	Nominal I.D. Inches	Minimum Wall Inches	Weight	Standard Ft. Per One Way Reel	Reel Size ( H x W x D)
Nominal Inches	Actual Inches	DR	Nominal I.D. Inches	Minimum Wall Inches	Lb.Per Foor (Approx.)	Standard Ft. Per One Way Reel	Reel Size ( H x W x D)
1"	1.315	11	1.063	0.120	0.19	10,000	102" x 48" x 32"
		13.5	1.111	0.097	0.16	10,000	102" x 48" x 32"
1.25"	1.660	11	1.343	0.151	0.31	7,500	102" x 48" x 32"
		13.5	1.402	0.123	0.26	7,500	102" x 48" x 32"
	Special Wrap					6,000	96" x 48" x 32"
1.5"	1.900	11	1.009	0.173	0.40	6,000	96" x 48" x 36"
		13.5	0.822	0.141	0.33	6,000	96" x 48" x 36"
	Special Wrap					5,000	102" x 48" x 36"
2"	2.375	11	1.921	0.216	0.63	3,000	96" x 48" x 36"
		13.5	2.005	0.176	0.52	3,000	96" x 48" x 36"
**2.5"	2.875	13.5	2.428	0.213	0.77	2,000	102" x 48" x 36"
3"	3.500	11	2.832	0.318	1.37	1,000	102" x 48" x 45"
		13.5	2.956	0.259	1.14	1,000	102" x 48" x 45"
4"	4.500	11	3.641	0.409	2.26	725	102" x 48" x 68"
		13.5	3.801	0.333	1.88	725	102" x 48" x 68"
	Special Wrap					600	96" x 48" x 68"
	Special Wrap					550	96" x 48" x 68"
6"	6.625	11	5.361	0.602	4.90	Offer in Bundle
		13.5	5.594	0.491	4.07	450	102" x 48" x 68"
Contact J-M's Polyethylene department for information on the following: § Special Diameters § Nonstandard SDR's § Custom Colors and / or Markings § Special Ropes or Tapes § Freight Charges § Special Parallel Reel Requirements § Custom Reel Lengths § PVC Telecom SCH 40 & TYPE C DUCT long bell are available upon request

Type	Class*	Specification
IPS	SDR 11 / 160 psi
	SDR 13.5 / 125 psi
	SDR 17 / 100 psi
	SDR 21/ 80 psi	ASTM D3035 or ASTM F714
*DIPS*	SDR 11 / 160 psi
	SDR 13.5 / 125 psi
	SDR 17 / 100 psi
	SDR 21/ 80 psi	ASTM F714
*IPS*	SIDR 11.5 / 125 psi
	SIDR 15 / 100 psi	ASTM D2239

DIPS Size (inches)	Nominal OD (inches)	SDR	Minimium Wall (in)	Average ID (in)	Weight (lbs/ft)	Ft. Per T/L
4	4.80	11 (160 Psi)	0.436	3.876	2.61	16,720
		13.5 (125 Psi)	0.356	4.045	2.17	16,720
		17 (125 Psi)	0.282	4.202	1.75	16,720
6	6.90	11 (160 Psi)	0.627	5.571	5.39	7,840
		13.5 (125 Psi)	0.511	5.817	4.48	7,840
		17 (125 Psi)	0.406	6.039	3.62	7,840
8	9.05	11 (160 Psi)	0.823	7.305	9.28	4,400
		13.5 (125 Psi)	0.670	7.630	7.70	4,400
		17 (125 Psi)	0.532	7.922	6.22	4,400
** 10"-24" Soon coming in September 2002!
10	11.10	11 (160 Psi)	1.009	8.961	13.95	2,880
		13.5 (125 Psi)	0.822	9.357	11.59	2,880
		17 (125 Psi)	0.653	9.716	9.37	2,880
12	13.20	11 (160 Psi)	1.200	10.656	19.73	2,240
		13.5 (125 Psi)	0.978	11.127	16.40	2,240
		17 (125 Psi)	0.776	11.555	13.24	2,240
14	15.30	11 (160 Psi)	1.391	12.351	26.51	1,680
		13.5 (125 Psi)	1.133	12.898	22.02	1,680
		17 (125 Psi)	0.900	13.392	17.80	1,680
16	17.40	11 (160 Psi)	1.582	14.046	34.29	1,440
		13.5 (125 Psi)	1.289	14.667	28.49	1,440
		17 (125 Psi)	1.024	15.229	23.03	1,440
18	19.50	11 (160 Psi)	1.773	15.741	43.07	1,000
		13.5 (125 Psi)	1.444	16.439	35.77	1,000
		17 (125 Psi)	1.147	17.068	28.91	1,000
20	21.60	11 (160 Psi)	1.964	17.436	52.85	800
		13.5 (125 Psi)	1.600	18.208	43.91	800
		17 (125 Psi)	1.271	18.905	35.49	800
24	25.80	11 (160 Psi)	2.345	20.829	75.38	640
		13.5 (125 Psi)	1.911	21.749	62.64	640
		17 (125 Psi)	1.518	22.582	50.63	640
* ASTM F-714 with NSF Approval. * 40 Feet Length in stick type. * Available in Blue, Green, Purple Color Stripes. * For Water Pressure Application: Potable, Sewer, and Reclaimed Water.